Panel Hygrostat JWT6013 electromechanical hygrostat is designed to control the relative humidity inside enclosures. When connected to an enclosure heater (dehumidifier), it will energize the heater at the humidity set point in order to raise the dew point. This helps prevent damage and malfunction of electronic components caused by condensation and corrosion.¹can also be used to control cooling fans, warning lights or other devices.
The critical relative humidity level for most components is 65%. Above 65% RH, condensation can form and cause malfunctions of electronic equipment. Long term, this can lead to corrosion and permanent damage of electronic components and systems.
Efficient condensation control
Adjustable relative humidity range
High switching capacity
DIN rail mountable
| Operating humidity | 30-90% RH |
| Switch tolerance | 4% RH(±3%） |
| Allow air speed | 15m/s |
| Maximum switching capacity | 250VAC, 5(0.2)A/DC 20W |
| Terminal block | 3-pole 2.5mm,0.8Nm |
| Installation | 35mm DIN rail mounting |
| Inflammability class | UL94 V0 |
| Size | 67x50x38mm |
| Operating/storage temperature | -20°C to + 80°C |
